Search for Learning and Development Services and Pathways

Course Type
7 events found
You may also find Online Learning to suit your requirements by changing the Course Type in the form above and reselect 'search'.

Page 1 of 1

Code: BH/21/1225 Safer Lifting & Handling of Loads Part 2 (AM)

VERY IMPORTANT – it is essential that you and your manager read the attached COVID-19 Risk Assessment Guidance for Training Participants before attending this training.

This course will help you to identify any manual handling issues within your area of work. You will be shown the correct way to move, lift and carry loads in order to reduce your risk of injury.  

The training will also show you how to carry out a risk assessment for load handling activities and teach you about the anatomy of the body and the mechanics of the back and spine.
 
IMPORTANT: This course will be delivered in two parts. Participants must complete the iHasco Manual Handling eLearning course (part 1) before attending the trainer led session (part 2). The eLearning course is accessible via the eLearning section on the Learning Gateway and is video based. It will take approximately 30 minutes to complete.

PLEASE NOTE: The trainer has produced a workbook for you to use during the virtual training session. Please download and print a copy of the this and a copy of the Object Handling Risk Assessment Template. If you are unable to do this, please save a copy of these documents on to your device or preferably on to a separarte device, so they are readily accessible during the training.

Refresher? Recommended 3 yearly.

Essential Information
Session Session Date Session Time Session Venue Map
1 29 September 2021 09:00 - 12:30 Brighton Town Hall - Volks Room Map

Code: BH/21/1181 Safer Working at Height Part 2 AM

VERY IMPORTANT – it is essential that you and your manager read the attached COVID-19 Risk Assessment Guidance for Training Participants before attending this training.

This training is highly recommended for those people who, as part of their role, need to carry out short duration work at height using basic access equipment such as stepladders.

This training is not suitable for those who routinely access significant heights over 3 metres, or for those who use more specialised equipment.

If you use, assemble or dismantle mobile scaffold towers then you must attend PASMA training. For further information about this course please e-mail premisesteamhelpdesk@brighton-hove.gov.uk

IMPORTANT: This course will be delivered in two parts. Delegates must complete the iHasco Working at Height  eLearning course (part 1) before attending the trainer led session (part 2). The eLearning course is accessible via the eLearning section on the Learning Gateway and is video based. It will take approximately 30 minutes to complete.

Please note: the trainer has produced a workbook for you to use during the training session. Please download and print a copy of this and two copies of the Working at Height Risk Assessment template, these documents are attached to the course information. If you are unable to do this, please save a copy of these documents on to your device or preferably to a separate device, so they are readily accessible during the training.

There is a practical element to this course so please wear appropriate clothing and footwear e.g. (loose clothing and closed, flat shoes or trainers)

Refresher? Recommended 3 yearly.

Essential Information
Session Session Date Session Time Session Venue Map
1 17 November 2021 09:00 - 12:30 Brighton Town Hall - Volks Room Map

Code: BH/21/1226 Safer Lifting & Handling of Loads Part 2 (AM)

VERY IMPORTANT – it is essential that you and your manager read the attached COVID-19 Risk Assessment Guidance for Training Participants before attending this training.

This course will help you to identify any manual handling issues within your area of work. You will be shown the correct way to move, lift and carry loads in order to reduce your risk of injury.  

The training will also show you how to carry out a risk assessment for load handling activities and teach you about the anatomy of the body and the mechanics of the back and spine.
 
IMPORTANT: This course will be delivered in two parts. Participants must complete the iHasco Manual Handling eLearning course (part 1) before attending the trainer led session (part 2). The eLearning course is accessible via the eLearning section on the Learning Gateway and is video based. It will take approximately 30 minutes to complete.

PLEASE NOTE: The trainer has produced a workbook for you to use during the virtual training session. Please download and print a copy of the this and a copy of the Object Handling Risk Assessment Template. If you are unable to do this, please save a copy of these documents on to your device or preferably on to a separarte device, so they are readily accessible during the training.

Refresher? Recommended 3 yearly.

Essential Information
Session Session Date Session Time Session Venue Map
1 23 November 2021 09:00 - 12:30 Brighton Town Hall - Volks Room Map

Code: BH/21/1231 Safer Lifting & Handling of Loads Part 2 (PM)

VERY IMPORTANT – it is essential that you and your manager read the attached COVID-19 Risk Assessment Guidance for Training Participants before attending this training.

This course will help you to identify any manual handling issues within your area of work. You will be shown the correct way to move, lift and carry loads in order to reduce your risk of injury.  

The training will also show you how to carry out a risk assessment for load handling activities and teach you about the anatomy of the body and the mechanics of the back and spine.
 
IMPORTANT: This course will be delivered in two parts. Participants must complete the iHasco Manual Handling eLearning course (part 1) before attending the trainer led session (part 2). The eLearning course is accessible via the eLearning section on the Learning Gateway and is video based. It will take approximately 30 minutes to complete.

PLEASE NOTE: The trainer has produced a workbook for you to use during the virtual training session. Please download and print a copy of the this and a copy of the Object Handling Risk Assessment Template. If you are unable to do this, please save a copy of these documents on to your device or preferably on to a separarte device, so they are readily accessible during the training.

Refresher? Recommended 3 yearly.

Essential Information
Session Session Date Session Time Session Venue Map
1 20 January 2022 13:30 - 17:00 Brighton Town Hall - Volks Room Map

Code: BH/21/1189 Safer Working at Height Part 2 PM

VERY IMPORTANT – it is essential that you and your manager read the attached COVID-19 Risk Assessment Guidance for Training Participants before attending this training.

This training is highly recommended for those people who, as part of their role, need to carry out short duration work at height using basic access equipment such as stepladders.

This training is not suitable for those who routinely access significant heights over 3 metres, or for those who use more specialised equipment.

If you use, assemble or dismantle mobile scaffold towers then you must attend PASMA training. For further information about this course please e-mail premisesteamhelpdesk@brighton-hove.gov.uk

IMPORTANT: This course will be delivered in two parts. Delegates must complete the iHasco Working at Height  eLearning course (part 1) before attending the trainer led session (part 2). The eLearning course is accessible via the eLearning section on the Learning Gateway and is video based. It will take approximately 30 minutes to complete.

Please note: the trainer has produced a workbook for you to use during the training session. Please download and print a copy of this and two copies of the Working at Height Risk Assessment template, these documents are attached to the course information. If you are unable to do this, please save a copy of these documents on to your device or preferably to a separate device, so they are readily accessible during the training.

There is a practical element to this course so please wear appropriate clothing and footwear e.g. (loose clothing and closed, flat shoes or trainers)

Refresher? Recommended 3 yearly.

Essential Information
Session Session Date Session Time Session Venue Map
1 25 January 2022 13:30 - 17:00 Brighton Town Hall - Volks Room Map

Code: BH/21/1228 Safer Lifting & Handling of Loads Part 2 (AM)

VERY IMPORTANT – it is essential that you and your manager read the attached COVID-19 Risk Assessment Guidance for Training Participants before attending this training.

This course will help you to identify any manual handling issues within your area of work. You will be shown the correct way to move, lift and carry loads in order to reduce your risk of injury.  

The training will also show you how to carry out a risk assessment for load handling activities and teach you about the anatomy of the body and the mechanics of the back and spine.
 
IMPORTANT: This course will be delivered in two parts. Participants must complete the iHasco Manual Handling eLearning course (part 1) before attending the trainer led session (part 2). The eLearning course is accessible via the eLearning section on the Learning Gateway and is video based. It will take approximately 30 minutes to complete.

PLEASE NOTE: The trainer has produced a workbook for you to use during the virtual training session. Please download and print a copy of the this and a copy of the Object Handling Risk Assessment Template. If you are unable to do this, please save a copy of these documents on to your device or preferably on to a separarte device, so they are readily accessible during the training.

Refresher? Recommended 3 yearly.

Essential Information
Session Session Date Session Time Session Venue Map
1 14 March 2022 09:00 - 12:30 Brighton Town Hall - Volks Room Map

Code: BH/21/1223 Safer Working at Height Part 2 AM

VERY IMPORTANT – it is essential that you and your manager read the attached COVID-19 Risk Assessment Guidance for Training Participants before attending this training.

This training is highly recommended for those people who, as part of their role, need to carry out short duration work at height using basic access equipment such as stepladders.

This training is not suitable for those who routinely access significant heights over 3 metres, or for those who use more specialised equipment.

If you use, assemble or dismantle mobile scaffold towers then you must attend PASMA training. For further information about this course please e-mail premisesteamhelpdesk@brighton-hove.gov.uk

IMPORTANT: This course will be delivered in two parts. Delegates must complete the iHasco Working at Height  eLearning course (part 1) before attending the trainer led session (part 2). The eLearning course is accessible via the eLearning section on the Learning Gateway and is video based. It will take approximately 30 minutes to complete.

Please note: the trainer has produced a workbook for you to use during the training session. Please download and print a copy of this and two copies of the Working at Height Risk Assessment template, these documents are attached to the course information. If you are unable to do this, please save a copy of these documents on to your device or preferably to a separate device, so they are readily accessible during the training.

There is a practical element to this course so please wear appropriate clothing and footwear e.g. (loose clothing and closed, flat shoes or trainers)

Refresher? Recommended 3 yearly.

Essential Information
Session Session Date Session Time Session Venue Map
1 28 March 2022 09:00 - 12:30 Brighton Town Hall - Volks Room Map